Open Frame OFPV
PINCH VALVES
The Trinova Pinch Valves are a heavy-duty enclosed and open frame construction full bore valve and-or cone sleeve valve that employs elastomer sleeves for flow shut-off and control in applications with abrasive and corrosive slurries. The sleeve is the only part in contact with the media, no other mechanical parts are required, and it is a maintenance free part. Pinch valves are mainly used in industries such as:
- Mining
- Chemical plants
- Pulp and paper
- Power plants
- Wastewater treatment
- Cement and ceramic
- Etc
Trinova’s patent pending design provides the end user with superior performance over other designs.
Trinova’s unique one piece stem eliminates friction and wear typically found in other two piece stem designs, while the quick release guide rails facilitate easy removal for-quick maintenance and sleeve replacement.
OFPV Open Frame Pinch Valve
Features:
• Open body design. Standard and high pressure
• ANSI B16.10 lengths making them interchangeable with Gate, Plug, and Ball Valves.
• Longer length sleeve for reduced stress and longer service life.
• Carbon Steel and SS Frame available.
• Center Line Clousure – for manual operation, Single Pinch for automated operation.
• Operating positions clearly visible.
• Operating positions clearly visible.
• 100% full port eliminates clogging and turbulence while minimizing pressure drops.
• Stem Protector Available.
• Elastomer sleeve is the only part exposed to the process fluid, Various materials available.
• Drop-tight bi-directional closure.
• Flanges drilled for ANSI 125/150#, ANSI 300# or DIN.
• Full flat-faced integral elastomer flanges.
• Can be installed in any position.
• No packing, gaskets or seals to maintain.
• Manual, Hydraulic, Pneumatic or Electric available.
• Open body design. Standard and high pressure
• ANSI B16.10 lengths making them interchangeable with Gate, Plug, and Ball Valves.
• Longer length sleeve for reduced stress and longer service life.
• Carbon Steel and SS Frame available.
• Center Line Clousure – for manual operation, Single Pinch for automated operation.
• Operating positions clearly visible.
• Operating positions clearly visible.
• 100% full port eliminates clogging and turbulence while minimizing pressure drops.
• Stem Protector Available.
• Elastomer sleeve is the only part exposed to the process fluid, Various materials available.
• Drop-tight bi-directional closure.
• Flanges drilled for ANSI 125/150#, ANSI 300# or DIN.
• Full flat-faced integral elastomer flanges.
• Can be installed in any position.
• No packing, gaskets or seals to maintain.
• Manual, Hydraulic, Pneumatic or Electric available.